Category Archives: interior

Lower A Carbon Footprint With Sash Window Draught Proofing This Winter

Posted on by
Reply

As winter approaches, many homes begin to experience cold spots or draughts coming in from the windows. When this occurs, energy bills can rise significantly as hot air is going out the windows as fast as cold air is coming in them. Taking the time to reduce your carbon foot print with sash window draught proofing this winter will be easy if you follow a few simple tips.

The savings that comes from making your home energy efficient can more than off-set the cost of having repairs, such as draught proofing done. In addition, some regional utility companies offer incentive programs to customers that get their windows repaired or replaced.

When you are contacting providers for draught proofing, it will be important that they are familiar with the area in which you live. The regulations and requirements for repairing and replacing windows are and if there will be permits required to do the work. Comparing providers for cost comparisons will also be important. The cost of window repair varies greatly and finding a provider that gives you the quality service you want at an affordable rate will save you money.

When you are evaluating your windows, it will be important to determine where cold spots in each room are. In some cases a draught may not be felt, but there may be a cold spot in the room that is the result of a seal in dis-repair. When windows are not sealed properly gasses and chemicals from your home escape to the outside in addition to heat.

Individuals who live near a street or road also have a problem with toxins and noise entering the home through the space that exists when windows are not sealed properly. It can be very uncomfortable when pollution from vehicles going by and the noise of traffic are constantly coming into the home.

There are several methods and techniques for sealing windows that will greatly reduce the draughts in a home. A qualified technician can provide you with details about the options available at the budget you have allocated for this project. In some cases, windows that are old or single paned should be replaced for double-glazed windows that will help to further insulate and protect the home.

A double glazed, well sealed window reduces the amount of pollution and noise that enters your home and significantly reduces the cost of keeping your home warm. It is easy to reduce your carbon foot print with sash window draught proofing this winter and reduce your energy bill by over half as soon as the project has been completed.

Diminish Your Homes Carbon Foot Print With Sash Window Draught Proofing This Winter And Save

Posted on by
Reply

Winter brings more than enough challenges to our lives. So, here is how you can reduce your carbon foot print with sash window draught proofing this winter. Draughty windows can be fairly quick to fix. It can save quite a lot of money and the planet gains as well.

There are some issues you need to deal with up front. The primary one is whether you want to deal with draught proofing yourself or have someone else do it for you. Lets assume at the moment that you will hire out the work. Here is what you should be concerned about when choosing a person for hire.

Will this workman want to cut or route out the sash channel? It is probably not the best alternative. It will weaken the window considerably. Is the plan to stick a piece of felt in the channel and call it a done deal? This is not particularly effective. It will help, but only a bit.

The felt brush that he was going to put in will help seal the window somewhat but it is not enough. It is perhaps better than nothing if the window is not damaged during the installation. But there are better ways to do this job.

Before doing any sealing the entire window should be inspected. This requires that the beading both staff and parting, be removed. It will be replaced with new and properly primed material. At this point any gaps that are seen in the crosspieces can be bridged.

A good workman will look at the window as a complete structure. There may be draughts coming in from other points besides the channels. The channel itself may have some debris that makes the seal incomplete. Any roughness that interferes with the channel will impact the seal. A good cleaning and then sealing should do the trick.

The parting bead that replaces what has been removed should be primed. Raw wood is unacceptable. Now a sealing strip can be placed in the groove. Good placement will make for a smooth surface that allows the window to move easily but give a good seal.

Now he can replace the windows and check to see that the ropes and weights are properly adjusted. If any ropes are frayed, replace them at this time. With the weights properly adjusted, the window should move freely and the seal be tight.

Finally check for any visible gaps both inside the house and out. The staff beading can be replaced and backfilled at this time. There you have it. This is how you can reduce your carbon footprint with sash window draught proofing this winter.